View previous topic :: View next topic |
Author |
Message |
itelio
Joined: 06 Nov 2014 Posts: 120
|
Posted: Thu Nov 30, 2017 3:40 am Post subject: SNMP Tests for HPE MSA P2000 Storage |
|
|
Hello,
The overall status of the P2000 would have to be the "Overall Unit Status".
I take the description that this sensor message reflects this status or do I see it wrong? The Mibbrowser returns the status as OK.
https://imgur.com/1JpEkXb
But this is the Status of the Sensor itself.
I need the Return Value of the Sensor.
Does anyone have experience with the monitoring of P2000 or MSA2040?
regards |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12807 Location: USA
|
Posted: Thu Nov 30, 2017 6:36 am Post subject: |
|
|
Could you please provide MIB file instead of the image?
(support@ks-soft.net)
As I understand this device does not support iLO, just SNMP?
HostMonitor 11.00 (will be available soon) may check HP servers using iLO protocol.
Regards
Alex |
|
Back to top |
|
|
itelio
Joined: 06 Nov 2014 Posts: 120
|
Posted: Wed Dec 20, 2017 9:50 am Post subject: re |
|
|
Hi
thanks for the answer
Here is the MIB File for HP MSA Storage Systems.
Will Hostmon be able to monitor this Storages also via ILO?
Finding out SNMP OIDs is so difficult.....
https://www.file-upload.net/download-12878345/mibs_P2000_fromHP.zip.html
Sensor Name
connUnitSensorName.32.128.0.192.255.29.184.46.0.0.0.0.0.00.0.1
On-Board Temperature 1-Ctlr A
Status of the Sensor -> Reply Value
connUnitSensorStatus.32.128.0.192.255.29.184.46.0.0.0.0.0.0.0.0.1
ok(3) --> this is the needed Information.
Message of the Sensor:
connUnitSensorMessage.32.128.0.192.255.29.184.46.0.0.0.0.0.0.0.0.1
On-Board Temperature 1-Ctlr A: 29 C 84.20F
Regards |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12807 Location: USA
|
Posted: Wed Dec 20, 2017 3:05 pm Post subject: |
|
|
Thank you.
As I see you can check status of the sensor, integer=3 means status Ok.
unknown(1),
other(2), -- the sensor indicates other than ok, warning or failure.
ok(3), -- the sensor indicates ok
warning(4), -- the sensor indicates a warning
failed(5) -- the sensor indicates failure
There is connUnitSensorMessage counter, it may show error message related to the sensor.
I do not see "Value of the Sensor" data.
Quote: | Will Hostmon be able to monitor this Storages also via ILO? |
I hope we upload version 11 next week, there are 5 tests related to HP iLO.
If you provide access, we can test it this week
(and correct our code if there are some problems related to this device...)
Regards
Alex |
|
Back to top |
|
|
itelio
Joined: 06 Nov 2014 Posts: 120
|
Posted: Tue Feb 13, 2018 3:16 am Post subject: re |
|
|
Hi Alex,
Sorry for the late reply.
I would like to run tests in version 11 to monitor HP storages.
But the version 11 must be final available. BETA is not allowed with us as we also monitor our customers.
I would then report in this regard |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12807 Location: USA
|
Posted: Tue Feb 13, 2018 12:01 pm Post subject: |
|
|
Its good idea to install Beta on test system and check how it works with your config.
Otherwise you will receive release, install it on production system and suddenly discover - it does not work properly.
We test HostMonitor a lot and we do not upload anything that works unstable on our systems. But we cannot test HostMonitor on your system.
So far we did not get any bugs reports related to version 11.10. So, if there are any bugs, you will get them in release as well.
Regards
Alex |
|
Back to top |
|
|
|