KS-Soft

ok, problem solved. :) I found Portmon at http://technet.microsoft.com/en-us/sysinternals/bb896644.aspx and it allowed me to see the problem. One of its features is it displays the number of characters sent and I noticed the message I was trying to send exceeded the 160 character SMS limit. To test ...

No, 6 seconds should be more than enough... when i type the command manually, I get the ">" prompt in about 1 second or less every time. When I type the CTRL-Z character, it takes a little bit longer... about 2.5 seconds to see a a response. But the error has to be occuring before that or ...

Ok, the second parameter is good when I test from hyperterminal after doing a modem reset. When I test with HostMonitor, something you're sending to the modem causes an error that you're not waiting long enough to receive. HM times out, but when I connect with Hyperterminal immediately after, I get ...

Hi Alex, sorry for the delay in responding but I've been out of the office since Friday last week. The new OCX fixed the last problem we had (great!) but a new error is popping up... fortunately it's easy to spot what it is. Here's the error message when performing the test of the SMS alert: Error: ...

I think you may have linked the old version of the gsm ocx. After closing HostMonitor, I renamed the original ocx "original_KSGsmXlib.ocx" and copied the new file into the HostMonitor8 directory as "KSGsmXlib.ocx". I then ran HostMonitor and performed a message test. I received t...

Ok, success with both of the test commands you asked me to try. Sending AT+CSMP=17,167,0,240 resulted in OK response Sending AT+CSMP=17,167,0,0 also resulted in OK response I then resent the first command (4th parameter = 240), then tested the ability to send a text message with that configuration. ...

I still get an error even when supplying the zero value for the validity period parameter. I also tried a value of one and got an error. I was curious what the current values are and issued a query and here's what the response was: AT OK AT+CSMP=1,0,0,240 ERROR AT+CSMP=1,1,0,240 ERROR AT+CSMP? +CSMP...

Here's Falcom's supported AT command set reference:

http://www.falcom.de/uploads/media/Samb ... nd_set.pdf

The CSMP command is covered on page 231.

Usually GSM modems does not provide any useful diagnistics :( Could you try AT+CSMP=1,,0,240 command using hyperterminal? Regards Alex Here's the result OK AT+CSMP=1,,0,240 ERROR I have friends at Falcom and will see if I can get more information regarding the behavior of the Samba with the CSMP co...

Hello, We obtained the Samba 75 specifically for use with HostMonitor and ran into the same error reported by another customer back in 2008: "ERROR was returned on AT command: AT+CSMP=1,,0,240" Comm settings are Com3 at 19200 and the modem is responding to AT commands. I tried with both PD...