KS-Soft

Yeah I've got the Com Port set as 2400 on the Com Port it's self as well as in Hostmonitor. Baud Rate = 2400 Mode = PDU also tested as Text Could it be the PIN? Service Center number has stayed the same 147017094009 Cheers Darren It sounds like a KS problem. Check you have the latest KSGsmxlib.ocx ...

Hi, I've upgraded to 6.51e and tested, I'm now not getting any SMS's and when I select the Z-text SMS Modem and select Test I get the following error. 'SMS Error: The specified module could not be found' Is there anything obvious you can think off? If not I'll hang on until your techies have chance...

dazhallt5 wrote:Cheers Paul,

In progress of downloading this.

Have you had a crack at this? has it made a differance in sending muliple users?

Cheers Darren

One of our techies had a quick play and reports things are OK, we will be doing some full testing over the next few days.

Hi, 1st day back... Thomas, thank for this info I'll have crack at this ASAP. Alex, I'll get this is installed, am I OK to go straight to 6.51e or do I have to install the the other versions available first? I'm currently running 6.42c Cheers Darren Please note, you have to install version 6.51 of ...

dazhallt5 wrote:Hi,

I've tried setting modem back to default as Paul suggested and also set the numbers up with a semicolon separating them and still only the 1st number is receiving the SMS.

Any other ideas?

Cheers Darren

Can you post the log

Hi Max Thats done the Trick! Just receiving the 1 SMS now!!! Cheers I am using v 6.42 I now have another slight problem... I have mutipul numbers that need to receive the SMS. Only the 1st number in the list are getting the message. I have this setup as 2 seperate actions sms number1 sms number2 I ...

Hi, I have now gone through the whole list of modems and i get 3 messages on most and on the others i'm geting no Messages at all. But getting an error in the log indicting the messages hasn't been sent at all!! I'm running the Z-text modem on Com3 so i think that might rule out the possiblity of a...

Hi Paul, Just tried turning the Echo off and still getting mutipul messages. When i use the seimens A1 i get 3 messagses with the log descripton as follows Sending... Com port open .. Ok GSM modem initialization .. Ok Error: Cannot send message to 'number'. GSM modem error. No reply on AT command: ...

Morning All, I have upgraded the firmware on the Z-text modem as per Paul and Nigel's instructions. I am now getting text messages!!! but I'm still getting the following error in the log. Sending... Com port open .. Ok GSM modem initialization .. Ok Error: Cannot send message to 'Number'. GSM modem...

Thank you, Paul. Thank you, Nigel. I have downloaded Z-textSMSATCommandSet.pdf from your site. It seems everything should work fine. I am looking foward to hearing from Darren. Darren, could you provide Remote Desktop or VNC access to the system, where HostMonitor is running? Regards, Max We have s...

The Z-text USB SMS modem only supports 2400 as a baud Rate (8 N 1) Paul, could you assist us with our unvestigation? Unfortunatelly, we do not have Z-text USB SMS modem in our environment, so we have never tested it. Could you provide a link to some technical information regarding Z-text USB SMS mo...

The Z-text USB SMS modem only supports 2400 as a baud Rate (8 N 1)